正文

Pretrip Inspection(1) Round Trip Inspection

(2008-07-09 17:44:34) 下一个

· RIGHT SIDE OF THE TRACTOR:

1. Exhaust stack SND

2. Back panel, catwalk, handrail, footstep, frame rail, crossmembers SND, no debris on the catwalk

3. Marker light SND and working

4. Side panel SND

5. Here is where I drain My air tank

6. Passenger door also My emergency exit

7. Door mirrors bracket SND

8. Door SND

9. I will check the door window when I do incab inspection

10. No debris on the floor

11. Passenger seat, seatbelt SND

12. Fuel tank cap SND, no leaks

13. Strap SND

14. No visible leak on the ground

15. Latch, fender, fender mirrors and mirror bracket SND

16. (Check inside the wheel)Leaf spring, u-bolts, hangers SND

17. Brake chamber and shocker SND, no audible leaks

18. Slack adjuster 90 degree with push rod

19. The sidewall no buldges, no cuts

20. The rim,no cracks no damage

21. The hub, no cracks no damages, no oil leaks

22. (Touch the tire face)The tire face, no cuts, no damages

23. (Thump)tire pressure adequate, tread depth good

24. (Check outside wheel)sidewall, no buldges no cuts

25. The rim no cracks, no damage

26. All lug nuts(touch every one) SND, no rust

27. The hub no cracks, no oil leaks

28. Valve stem 90 degree with metal capped

29. I will check all My tires the same way as this one.

· THE FRONT OF THE TRACTOR:

1. Air deflector, sun visor,windsheld, windsheld wiper, hood, grill, bumper SND

2. Tractor clearance lights, hazard lights, headlights SND and working

3. Licence plate SND with valid sticker

4. No visible leak on the ground

· THE LEFT SIDE OF THE TRACTOR:

1. My fender mirrors, mirror brackets, fender and latch SND

2. I will check this wheel the same way I did the right one, do you want me demonstrate?

3. My safety inspection sticker valid

4. My door mirrors and brackets SND

5. (Open the door)My door SND

6. My door window working

7. Handrail, footstep SND

8. My steering wheel no excessive play

9. My clutch, brake padel no excessive play, no debris on the floor

10. My seat, seatbelt SND

11. My fire extinguisher SND and fully charged

12. My fuel tank cap SND, no leaks

13. My strap SND

14. No visible leaks on the ground

15. Here are My emergency equipments, I have 3 reflective triangles, first aid kit, extra fluid in here.

16. My side panel SND

17. My indicator light SND and working

18. My exhaust stack SND

19. Back panel, catwalk, frame rail, crossmember, hand rail foot step SND

20. No debris on the catwalk

21. All the lines hung and connected properly, air hoses no audible leaks, electrical line working

· FRONT PANEL OF TRAILER:

1. In the bubble is the paper work for my trailer, I have ownership, safety inspection certificate matching this sticker in the bubble.

2. Top bottom rail, and panel SND

3. My brake chamber SND, slack adjuster 90 degree with push rod

· FIRST THIRD OF TRAILER:

1. My safety inspection sticker is valid

2. No gap between the fifth wheel and trailer plate

3. Top bottom rail and panel, trailer plate crossmembers, SND

4. My air bags, shocker SND, no audible leaks

a. Leaf spring u-bolts, hangers SND

b. (Check inside the dual)the sidewall no buldges, no cuts

c. The rim no cracks, no damage

d. The hub no cracks, no damage, no oil leaks

e. (Touch the dual tire faces)the tire face, no cuts, no damage

f. (Thump the dual tire face)tire pressure adequate, tread depth good

g. No debris between the dual

h. (outside the wheel)sidewall, no buldge, no cuts

i. the rim no cracks, no damage

j. all lug nuts SND, no rust

k. the hub no cracks, no damage, no oil leaks

l. valve stem 90 degree with metal capped

m. (thump the next duals)I will check this axle the same way as I did to that one, do you want me demonstrate?

5. The mud flap SND with proper size

6. My landing gear SND, all the way up, no debris on landing gear feet, handle in safety place

7. (Go under the trailer)My jaws locked properly

8. Frame rail, crossmember SND

9. Hazard lights, licence plate light SND and working, licence plate SND

· SECOND THIRD OF TRAILER:

1. Top bottom rail, panel, trailer plate, crossmember SND

2. Marker light SND and working

· LAST THIRD OF TRAILER:

1. (Go under the trailer)My belly lines hung properly with more than one foot off the ground, no audible leaks

2. My bogie and bogie rails SND, the bogie pins in lock position

3. My bogie button SND

4. My air tanks, air bags, brake chambers, shock SND, no audible leaks, slack adjusters 90 degree with the push rods

5. Top bottom rail, panel, trailer plate crossmembers SND

6. I will check this tendom the same way I did to tractor’s, do you want me demonstrate?

7. Mud flap SND with proper size

8. My ABS light SND and off, marker light SND and on

· BACK PANEL OF TRAILER:

1. All my hinges, latches, handles SND

2. Top bottom rail, panel, bumper SND

3. Clearance lights, hazard lights, running lights, licence plate light SND and working

4. Licence plate SND

5. I will check the right side of My truck the same way I did left side, the only difference is that the passenger door is also my emergency exit, do you want me to demonstrate?

6. Next I will check My turning signals and brake lights, would you like to assisst me or should I do it by Myself?

[ 打印 ]
阅读 ()评论 (1)
评论
目前还没有任何评论
登录后才可评论.